The Maxigrip ice stud HM-11 has a durable 2.1mm [0.08in] carbide tip/core and a hardened, galvanized screw with robust coarse threads to maintain the tire stud in place in all conditions.
The Maxigrip ice stud HM-11 is 11mm [1/2in] in total length. The recommended minimum tire tread depth is 10mm [0.39in].
Maxigrip carbide tire studs HM-11 are intended for ATV, cross country motorcycle, enduro motorcycle, trucks, compact utility tractor and many others. The Maxigrip snow studs are also increasingly popular for boots, working boots and running shoes.
The Maxigrip studs HM11 are sold in box of 1000, 100 or 24 studs to meet all of your needs. Please note that a Maxigrip installation tool is included in each box.
Please refer to this chart for guidance on the number of studs required:
Showing reviews 1-10 of 16 | Next
Posted by Terry on 20th Feb 2015
I bought a box of 100 MH11 and have put them in work boots and kamik snow boots.They work very well. I work outside all winter and these have been excellent. I would have had many falls on ice if not for the ice studs.
They are the tops!
Posted by Tom on 24th Dec 2014
I bought a box of 24 MH11 for a 3/4 worn out pair of my wife's running shoes. They went in very easily with a cordless drill at the very slowest speed. The depth set very consistently. I wouldn't recommend using a manual screwdriver unless the sole material is very hard / rigid, it would be too difficult to start on soft soled athletic shoes without a drill. Only towards the thinnest part by the toes did they come close to poking through the sole, but they won't come through the rigid insole. I ended up using seven per foot. They look awesome, work great, and I don't have to worry about her slipping / falling when she's running (approx 40mi / 65km per week). I hope she doesn't try to wear them on a tile floor!!!
Posted by John on 23rd Jan 2014
I work in North Dakota and we have lots of ice this year. I tried these out on my work boots and they have made a HUGE difference. I will be getting another few packs to do my hiking boots also. It would be great if there was a way to ship to the USA for less.
Posted by William Hutcheson on 14th Jan 2014
works great on ice and frozen ground - easy install 8 studs per boot - cost high
Posted by Unknown on 9th Dec 2013
Have given these a 5 star rating because of the manufacture have still to test them out but did get clobbered with a import fee.
Posted by Schuff on 6th Nov 2013
We are using these studs in are boots around the Rig site on rig matting where it is icy and crews are not having any traction problems.
Posted by Mike on 3rd Feb 2013
I've been using the studs for hiking mt agumenigus near my house The springs have been flowing and freezing the trail. The studs allow me to hike like summer time!
Posted by Leavitt on 1st Feb 2013
Posted by Kenny on 28th Jan 2013
Got my tires studed with the recommended studs for the Enduro. They were much smaller than I expected, however they seem to work well. Took 200 studs to do the front and rear. They seem to be holding up well riding on the asphault. I gave it four stars because I think they are a bit over priced. I am considering studing my street bike next year. I do not drive so my motorcycle is my only mode of transportation. But with theses studs, I believe my bike will outperform any vehicle in the snow and ice.
Posted by Chuck on 10th Jan 2013
Worked great.Could't get anywhere on the ice we had with the tractor.Put them on and went to work.Saved some to put on my work boots.Was able to get around and no slipping.Will be sending for more.
Showing reviews 1-10 of 16 | Next